CNC operated butt welding machine suitable for PE,PP,PVDF and other thermoplastic materials pipes and fittings.
The CNC control provide the following main functions:
– Assist the operator during the welding cycle
– Check and control the welding parameters during the welding cycle
– At the end of welding cycle print the welding report
While set up the welding data and positioned the pieces to be welded , the CNC control will carry on the welding cycle
The Welding data to be set up are: Material Type , Diameter , Wall Thickness or SDR , Welding Standard ( DVS, ISO , WIS , ISO HP , etc )
Additional Upper Cylinder supplied with the machine
The database related to the welding can be transfer to a PC by means of using the Software supplied
The pivoting clamps allow the construction of segmented (lobster back) bends in different radius.
By means of the adjustable cross slide on the fixed trolley it’s possible to have always the perfect alignment.
The electric facing tool as well has the cross slide adjustable in order to mill always into the pipe’s centre.
These machines can be supplied ( on request ) with Tees and Crosses Devices for fabrication of 90° Tees & Crosses.
Machines , according to CE specifications.
| Welding Range |  900 – 1600 mm 900 – 1200 mm |
|
| Standard Voltage Power Consumption |
400 V 3 ph. – 50 Hz 68 kW – 85 A |
Standard Machine Composition:
- Basic machine complete with motor electric and hydraulic circuits, controls board complete with CNC and printer
- Two pivoting clamps d.1600 mm
- Reduction for the pivoting clamps d. 900,1000, 1200, 1400 mm
- Electric mill cutter
- PTFE coated heating mirror
Accessories on request
|
|
|
Stub ends device d. 900 – 1600 mm |
|
|
90° Tees devices d.1200mm with reducing inserts d.900-1000mm |
|
|
Additional Clamp for Crosses d. 1200mm with inserts d.900-1000mm |
|
|
|
|
|
|
|
Technical data might be changed without notice
| Photogallery: | |||
|---|---|---|---|
|
|
|||
