Plastic pipes butt fusion machines and other plastic welding hardware
Call Us : (+39) 010 642 33 96

PL 1601 CNC

CNC operated butt welding machine suitable for PE,PP,PVDF and other thermoplastic materials pipes and fittings.
The CNC control provide the following main functions:
– Assist the operator during the welding cycle
– Check and control the welding parameters during the welding cycle
– At the end of welding cycle print the welding report
While set up the welding data and positioned the pieces to be welded , the CNC control will carry on the welding cycle
The Welding data to be set up are: Material Type , Diameter , Wall Thickness or SDR , Welding Standard  ( DVS, ISO , WIS , ISO HP , etc )
In order to carry on Welding cycles an Additional Upper Cylinder ( included ) must be installed
The  database related to the welding can be transfer to a PC by means of using the Software supplied
The pivoting clamps allow the construction of segmented (lobster back) bends in different radius.
By means of the adjustable cross slide on the fixed trolley it’s possible to have always the perfect alignment.
The electric facing tool as well has the cross slide adjustable in order to mill always into the pipe’s centre.
These machines can be supplied ( on request ) with Tees and Crosses Devices for fabrication of 45° , 60° , 90° Tees.
Machines , according to CE specifications.

PL 1600 cnc

Welding Range Saldatura dritta, curve, fittings 900 – 1600 mmgamma_pl1600-1 900 – 1600 mm
Standard Voltage
Power Consumption
400 V 3Phases. – 50 Hz
152 kW – 245 A

Standard Machine Composition:

  • Basic machine complete with motor electric and hydraulic circuits, controls board complete with CNC and printer
  • Two pivoting clamps d.1600 mm with Upper Cylinder
  • Reduction for the pivoting clamps d. 900,1000, 1200, 1400 mm
  • Electric mill cutter
  • PTFE coated heating mirror
Accessories on request


Stub ends device d. 900 – 1600 mm


90° Tees devices d.1600mm with reducing inserts d.900-1400mm

Additional Clamp for Crosses d. 1400mm with inserts d.900-1400mm

45°& 60° Tees devices d. 1200mm with inserts d.900-1000mm

Additional Upper Cylinder ( for 45°,60° 90° Tees, Crosses devices)

45°,60° 90° Tees, Crosses devices Connecting Plates (only for ISO HP & ASTM welding standard)

Technical data might be changed without notice




Contact Us:

I.T.S. Ital Trade Services Srl
via Scarsellini, 77
16149 Genova (GE) - ITALY
Tel.: +39 010 6423396
Fax: +39 010 6423513
P.I. (VAT CODE) 02661630109