Plastic pipes butt fusion machines and other plastic welding hardware
Call Us : (+39) 010 642 33 96

PL 1000 CNC

 

CNC operated butt welding machine suitable for PE,PP,PVDF and other thermoplastic materials pipes and fittings.
The CNC control provide the following main functions:
– Assist the operator during the welding cycle
– Check and control the welding parameters during the welding cycle
– At the end of welding cycle print the welding report
While set up the welding data and positioned the pieces to be welded , the CNC control will carry on the welding cycle
The Welding data to be set up are: Material Type , Diameter , Wall Thickness or SDR , Welding Standard  ( DVS, ISO , WIS , ISO HP , etc )
In order to carry on Welding cycle according to ISO HP and ASTM an Additional Upper Cylinder ( on request ) must be installed
The  database related to the welding can be transfer to a PC by means of using the Software supplied
The pivoting clamps allow the construction of segmented (lobster back) bends in different radius.
By means of the adjustable cross slide on the fixed trolley it’s possible to have always the perfect alignment.
The electric facing tool as well has the cross slide adjustable in order to mill always into the pipe’s centre.
These machines can be supplied ( on request ) with Tees and Crosses Devices for fabrication of 45° , 60° , 90° Tees.
Machines , according to CE specifications.

PL 1000 1

 

 

Welding Range Saldatura dritta, curve, fittings 400 – 1000 mm

Tee, Croci, Braghe 355 – 800 mm

Standard Voltage
Power Consumption
400 V 3 ph. – 50 Hz
35,0 kW – 58 A

Standard Machine Composition:

  • Basic machine complete with motor electric and hydraulic circuits, controls board complete with CNC and printer
  • Two pivoting clamps d.1000 mm
  • Reduction for the pivoting clamps d. 400,450,500,560,630,710,800,900 mm
  • Electric mill cutter
  • PTFE coated heating mirror
Accessories on request

Stub ends device d. 355 – 1000 mm

90° Tees devices d.800mm with reducing inserts d. 355-710mm

Additional Clamp for Crosses d. 800mm with inserts d.355-710mm

45° and 60° Tees devices dia. 800mm with inserts d. 355-710mm

Additional Upper Cylinder (only for ISO HP & ASTM welding standard)

45°,60° 90° Tees, Crosses devices Connecting Plates (only for ISO HP & ASTM welding standard)

Technical data might be changed without notice

Photogallery:

 

MADE IN ITALY

Contact Us:

I.T.S. Ital Trade Services Srl
 
via Scarsellini, 77
16149 Genova (GE) - ITALY
Tel.: +39 010 6423396
Fax: +39 010 6423513
E-Mail: info@its-tecnodue.com
 
P.I. (VAT CODE) 02661630109