Plastic pipes butt fusion machines and other plastic welding hardware
Call Us : (+39) 010 642 33 96

PL 2000 CNC

CNC operated butt welding machine suitable for PE,PP,PVDF and other thermoplastic materials pipes and fittings.
The CNC control provide the following main functions:
– Assist the operator during the welding cycle
– Check and control the welding parameters during the welding cycle
– At the end of welding cycle print the welding report
While set up the welding data and positioned the pieces to be welded , the CNC control will carry on the welding cycle
The Welding data to be set up are: Material Type , Diameter , Wall Thickness or SDR , Welding Standard  ( DVS, ISO , WIS , ISO HP , etc )
In order to carry on Welding cycles an Additional Upper Cylinder ( included ) must be installed
The  database related to the welding can be transfer to a PC by means of using the Software supplied
The pivoting clamps allow the construction of segmented (lobster back) bends in different radius.
By means of the adjustable cross slide on the fixed trolley it’s possible to have always the perfect alignment.
The electric facing tool as well has the cross slide adjustable in order to mill always into the pipe’s centre.
These machines can be supplied ( on request ) with Tees and Crosses Devices for fabrication of 45° , 60° , 90° Tees.
Machines , according to CE specifications.

PL 2000 cnc

Welding Range Saldatura dritta, curve, fittings 1400 – 2000 mmgamma_pl1600-1 1400 – 2000 mm
Standard Voltage
Power Consumption
400 V 3Phases. – 50 Hz
152 kW – 245 A

Standard Machine Composition:

  • Basic machine complete with motor electric and hydraulic circuits, controls board complete with CNC and printer
  • Two pivoting clamps d.2000 mm with Upper Cylinder
  • Reduction for the pivoting clamps d.  1400, 1600, 1800 mm
  • Electric mill cutter
  • PTFE coated heating mirror
Accessories on request


Stub ends device d.1400 – 2000 mm


90° Tees devices d. 2000mm with reducing inserts d.1400-1800mm

Additional Clamp for Crosses d. 2000mm with reducing inserts d.1400-1800mm

Additional Upper Cylinder ( for 90° Tees, Crosses devices)

90° Tees, Crosses devices Connecting Plates (only for ISO HP & ASTM welding standard)

Technical data might be changed without notice


Photogallery:PL 2000  029
PL 2000  022
 PL 2000  026

Contact Us:

I.T.S. Ital Trade Services Srl
via Scarsellini, 77
16149 Genova (GE) - ITALY
Tel.: +39 010 6423396
Fax: +39 010 6423513
P.I. (VAT CODE) 02661630109